Alarm modem ALMIOG03
Product discontinuation:
The product will be discontinued on 31.05.2022.
Will be replaced by: MY2B-X-X-M-G
Configurable alarm modem
- SMS message in the event of a change to the digital or analog input
- Switch digital outputs via SMS or call
- Authentication by telephone number + PIN code
- Integrated real-time clock with battery backup
- Transfer of project planning via micro USB
With the advanced GSM alarm modem, Wachendorff offers an alarm/remote control solution for monitoring or controlling decentralized systems or installations.
Changes to the digital inputs and the analog input can be transmitted directly via SMS.
The digital outputs can be controlled via SMS or a free call. Security functions such as caller identification via cell phone number and text comparison can be activated via the free, German-language configuration software.
In systems without an operator, such as pumping stations, solar fields and elevators, fault messages can be transmitted directly to the service technician.
The DIN rail mounting and screw terminals ensure quick and safe installation and easy wiring of the device.
Digital inputs:
Quantity: 2,
galvanically isolated
Switching type: positive switching (PNP)
Max. 48VDC
Digital outputs:
Quantity: 2,
galvanically isolated
Switching type: NO contact
Load capacity:
Max. 48 VDC; max. 250 mA
Analog input:
Quantity: 1
Resolution: 10 Bit
Input range: 0 VDC to 10 VDC
SIM card slot:
Quantity: 1
Micro SIM card
The slot is located on the front of the device.
Interfaces:
1 x micro USB port
Antenna connection:
Quantity: 1
SMA socket
Supported frequency bands:
GSM/GPRS: 850, 900, 1800, 1900 MHz
LED:
4 x signal display for supply and communication
Supply:
12 VDC to 35 VDC, 3.5 Watt or
8 VAC to 24 VAC, 3.5 VA, 50/60Hz
Software:
Free configuration software SW67302 for
parameterization of the device
Operating temperature:
-20 °C to +70 °C
Humidity:
10% to 80%, non-condensing
Housing:
PVC
Color: Blue
Dimensions (WxHxD):
71mm x 95mm x 60mm
Weight:
approx. 200g
Fastening:
Mounting on the DIN rail
Scope of delivery:
ALMIOG03:
Device, short rod antenna approx. 5 cm
ALMIOG02:
Alarm modem ALMIOG03
Omnidirectional mobile radio antenna with 5 m cable (WEW40902F)
Free GSM alarm modem configuration software ALMIOG03 for
parameterization of the alarm modem.
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
DIN rail power supply unit DRS3-24
Single-phase input: 85 VAC to 264 VAC
Output: 24 VDC
Output power of 72 watts (3 A)
Operating temperature: -25 °C to +71 °C
Overload and overvoltage protection
Mobile radio antenna WEW40902F
Omnidirectional antenna
GSM, 2G/GPRS, 3G/UMTS/HSPA
This product is discontinued
Will be replaced by: WEW40902K
Technical Note Ewon 0301
variables (tags) from a Siemens/VIPA controller
read out.
Status 03/2014
Download (0.98 MB) 
Technical Note Ewon 0302
variables (tags) from a Rockwell Automation controller
read out.
Status 10/2010
Download (1.19 MB) 
Technical Note Ewon 0303
Read variables (tags) via Modbus RTU and TCP.
Status 04/2011
Download (1.04 MB) 
Technical Note Ewon 0304
Read variables (tags) from a Hitachi controller.
Status 10/2010
Download (0.91 MB) 
Technical Note Ewon 0305
Read variables (tags) from a Mitsubishi control unit.
Status 05/2011
Download (849 KB) 
Technical Note Ewon 0306
Read variables (tags) from an Omron controller.
Status 07/2011
Download (1.30 MB) 
Technical Note Ewon 0307
Read variables (tags) from a Jetter controller.
Status 04/2013
Download (1.02 MB) 
Technical Note Ewon 0401
Remote maintenance of a Siemens/VIPA control system
Status 10/2014
Download (2.81 MB) 
Technical Note Ewon 0404
Remote maintenance of a Hitachi control system
Status 04/2011
Download (789 KB) 
Technical Note Ewon 0408
Remote maintenance of a Beckhoff controller
Status 03/2014
Download (415 KB) 
Technical Note Ewon 0601
Establishing a VPN connection with Talk2M
Status 10/2017
Download (2.00 MB) 
to top
Contact
Request form
