Display:

2-line LED display
Upper line:
4-digit, green with 10.2 mm digits
Bottom line:
4-digit, red with 7.6 mm digits

Indicators:

Two red indicators for the status of the relay outputs and one yellow indicator for serial communication.
1, 2: ON when output is active.
R: ON for serial communication
cnt1: Display of counter 1
cnt2: Display of counter 2

Keyboard:

4 buttons for programming and setting the setpoint.

Inputs:

Three digital inputs adjustable as PNP, NPN or TTL.
Programmable switching thresholds for activation as high active/low
active/rising edge or level-controlled.
See also table under Drawings Input signal/logic level

Function inputs:

Gate input, hold, direction selection,
setpoint setting (I3).

Input frequency:

Minimum 1 Hz to maximum 100 kHz.

Relay output:

1 changeover relay with 5 A @ 250 VAC and 1 NO contact
with 5 A @ 250 VAC.

Sensor supply:

24VDC
- 30 mA with 24 VAC supply
- 40 mA with 24 VDC supply
- 60 mA with 110 to 230 VAC supply.

Power supply:

24 VAC/DC to 230 VAC/DC +/-15 %, 50/60 Hz; 2W.

Data protection:

Password-protected access to setpoint, alarm values and parameters.

Programming:

Programming and operation is menu-guided via the front buttons. The programming module can also be used to program the controller via Windows™ software. The memory card has an internal battery. This makes it possible to program the devices without connecting the power supply (up to 1,000 programs with one battery).

Protection class:

Jet-proof and dust-tight to IP65 from the front (with seal), rear protection class IP20.

Dimensions:

Control panel (WxHxD): 77 mm x 35 mm x 53 mm
Control panel cut-out (WxH): 70.5 mm x 28.5 mm
Recommended thickness of the control panel 2 to 8 mm.

Fastening

Via mounting frame with plastic clamping bracket.

Housing:

Black, impact-resistant plastic housing.

Connection:

About screw terminals

Weight:

approx. 100 grams.

Ambient conditions:

Operating temperature: 0 °C to +45 °C;
relative humidity: 35% to 95%rh,
non-condensing.

Scope of delivery:

Device, fixing material, seal, operating instructions.

Certificates:

UL, CE, RoHS

Customs tariff number:

9026 80 20

Manufacturer:

Wachendorff Prozesstechnik GmbH & Co. KG