Power supply:

Supply voltage: 24 VDC typical
Supply voltage range: 11 VDC to 28.8 VDC
Protection: Output current limitation (min. 1.5 A), reverse polarity protection

Power consumption:

100 mA typical at 24 VDC

Total current for the I/O modules:

1.5 A at max. 5 V

Isolation:

System voltage to internal logic: Not isolated
System voltage to I/O driver: Isolated

Field performance:

Supply voltage: 24 VDC typical (max. 28.8 VDC)
Supply voltage range: 11 VDC to 28.8 VDC

Max. Field power Contact:

10 ADC max.

Module dimensions (LxHxW):

54 mm x 99 mm x 70 mm

Node type:

Slave node (MODBUS/TCP, MODBUS/UDP server)

Number of extensions for I/O slots:

max. 63 slots

Input variable:

max. 252 bytes

Output variable:

max. 252 bytes

Max. length of bus cable:

Up to 100 m from the Ethernet hub/switch with
twisted CAT3 UTP/STP

Max. Number of nodes:

Limited by Ethernet specification

Baud rate:

10/100 MBit/s, auto-negotiation, full-duplex

Protocol:

MODBUS/TCP, MODBUS/UDP, DHCP, 10 TCP connections

Interface connector:

2x RJ-45

LED status display:

1x for module status display (MOD), green/red
1x for link status display (LINK), green
1x for active status (ACTIVE), green
1x for I/O expansion module status (I/O), green/red
1x for system voltage status, green
1x for field voltage status, green

2x for RJ-45 connection, yellow for link active and green not used

Serial interface:

RS-232 for Modbus/RTU, operating device or IOGuidePro

Serial interface configuration (RS-232):

Node: 1 (fixed)
Baud rate: 115200 (fixed)
Data bit: 8 (fixed)
Parity: none (fixed)
Stop bit: 1 (fixed)

IP address setting:

DHCP/BootP or IOGuidePro

IP address range:

xxx.xxx.xxx.1 to 253 (available range)
xxx.xxx.xxx.254 to 255 (reserved for IAP)

Protection class:

IP20