2-channel triac output module, 15 VAC to 132 VAC, 0.5 A, ST2852
The connected load is transmitted from the control unit via the digital output.
Delisting
If you have any questions, please contact our technical application consultants.
- The connected load is transmitted from the control unit via the digital output.
- The module has 3 status LEDs: one for the network status, two for the status of the field devices.
- Be sure to use the field distributor (ST7241 or ST7641) if you are using VAC.
Control signals from the automation device are transmitted to the connected actuators via the digital output module. All outputs are short-circuit-proof. Field and system level are electrically isolated.
Power consumption:
max. 35 mA at 5 VDC
Isolation:
between user current and system, field voltage no insulation
Field voltage
Nominal voltage: 120 VAC typical
Voltage range: 12 VAC to 125 VAC
Cross sections:
I/O cable max. 2 mm²
Connection technology:
Removable connection level (terminal blocks)
Dimensions (WxHxL):
12 mm x 99 mm x 70 mm
Operating temperature:
-20 °C to 55 °C
Operating altitude:
max. 2,000 m
Assembly:
DIN rail
Number of outputs:
2 channels
Indicators:
2 x green for status, 1 x green/red for FnBus status
Configuration software for FnIO modules
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
Download (51.01 MB)
Here you can download our flyer "CODESYS - PLC - WebPanels a strong team for your application".
Download (1.39 MB)
Contact
Request form
