Display:

2-line LED display
Upper line: Actual value, 4 digits, green with 10.2 mm digits
Lower line: setpoint, 4 digits, red with 7.6 mm digits

Indicators:

Two red indicators for the status of the relay outputs and
one yellow indicator for serial communication.
C1, C2: ON when output is active.
R: ON for serial communication

Keyboard:

3 buttons for programming and setting the
setpoint.

Inputs:

Three digital inputs adjustable as PNP, NPN or TTL.
Programmable switching thresholds for activation as high active/low
active/rising edge or level-controlled.
See also table under Drawings Input signal/logic level

Function inputs:

Gate input, hold, direction selection,
setpoint setting (I3).

Input frequency:

Minimum 1 Hz to maximum 100 kHz.

Relay output:

2 NO contacts with 8 A @ 250 VAC. Programmable
as normally open or normally closed contact.

Sensor supply:

24 VDC
- 30 ma with 24 VAC supply
- 40 mA with 24 VDC supply
- 60 mA with 110 to 230 VAC supply

Power supply:

24 VAC/DC to 230 VAC/DC +/-15 %, 50/60 Hz; 2W.

Data protection:

Password-protected access to setpoint, alarm values and parameters.

Programming:

Programming and operation is menu-guided via the front buttons. With the programming kit, the controller can also be programmed using Windows ™ software, which is compatible with Windows 7 and Windows 10. The memory card has an internal battery. This makes it possible to program the devices without connecting the power supply (up to 1000 programs with one battery).

Dimensions:

W 48 mm x H 48 mm x D 107 mm. Panel cut-out
46 mm x 46 mm. Fastening via mounting frame with screws.
Recommended thickness of the switch panel 2 to 6 mm.

Housing:

Black, impact-resistant plastic housing.

Protection class:

Jet-proof and dust-tight from the front in accordance with IP65 (with seal).
seal), housing and rear protection class IP20.

Connection:

Via screw terminals.

Ambient conditions:

Operating temperature: 0 °C to +40 °C;
Relative humidity: 35% to 95%rh, non-condensing.

Scope of delivery:

Device, fixing material, seal, operating instructions.

Weight:

approx. 350 grams.

Certificates:

UL, CE, RoHS

Customs tariff number:

9026 80 20

Manufacturer:

Wachendorff Prozesstechnik GmbH & Co. KG