Temperature display for thermocouples CUB5TC
5-digit digital display for
Thermocouple type: S, T, J, N, K, E, R, B, -10 mV to + 60 mV
- Programmable input for thermocouples
- Thermocouple type: S, T, J, N, K, E, R, B, -10 to + 60 mV
- Adjustable offset
- 5-digit, 12 mm high brilliant LCD or red backlit display
- IP65 protection class
- Easily programmable via front keys or optionally via software
- Unit: °C or °F , resolution: 1° or 0.1°
The CUB5TC is an inexpensive temperature display for thermocouples. It is programmed via the two front buttons or optionally via software and was developed for harsh industrial environments. It is typically used where temperatures are displayed on site, e.g. industrial dishwashers, heating systems, food and film packaging machines and in the chemical industry. The display is available as a standard LCD or with red/green backlighting. Thanks to the minimum and maximum value memory and the optional upgrade with up to 2 switching outputs and interface (programming via software possible), the CUB5TC has a very good price/performance ratio.
Display
5-digit, 12 mm high LCD, standard or with red/green switchable and dimmable backlight.
Keys
SEL: Step to the next program section, save the programming or select the enabled display.
RST: Change the parameters in the programming or reset the minimum/maximum value or alarm output.
Entrance
Thermocouple type: S, T, J, N, K, E, R, B, -10 to + 60 mV
Offset
Programmable from -999 to + 9999
Response time
500 ms
Resolution
1 °C/F or 0.1 °C/F
Protection
30 VDC between TC+ / TC-, 3 VDC between TC- / ground.
User input
Low-active, delay time: 50 mSec for activation or deactivation, typ. 5 mSec for all other functions.
Programmable function (see programming).
VILmax= 1.0 V,VIHmin=+2.4 V, Vmax=+28 V
Relay output card with switching output (option)
Type: Form-C relay, 1A at 30 VDC or 0.3 A at 125 VAC.
Closing and opening delay: 4 mSec. max.
Transistor output card (option)
2 outputs Type: NPN Open
Drain MOSFET without galvanic isolation, 100 mA max., max. 30 Volt.
Interface card (option)
RS232:
Half-duplex (not isolated) 300 baud to 38400 baud.
RS485:
Transmission delay 2 mSec./min. or 50 mSec./min. adjustable.
2-wire/half-duplex (non-isolated), 300 baud to 38400 baud, up to 32 devices in the loop. Address 0 to 99.
USB:
Virtual COM port Baud rate: 300 baud to 38.4 kbaud. Connection type B, address: 0 to 99
Programming
Programming is carried out via the two front buttons or via software (only with interface card). The simple and logically structured menu navigation allows very fast commissioning. Access rights can also be assigned.
Data backup
EEPROM
Protection class
Jet-proof and dust-tight to IP65 from the front.
Power supply
9 - 28 VDC, standard LCD: max. 40 mA, with backlight max. 125 mA. 230 VAC supply via directly screw-on power supply unit (see accessories).
Housing
Plastic housing W 75 mm x H 39 mm x D 44 mm. Panel cut-out: DIN 68 mm x 33 mm. Fastening via mounting frame.
Connection
Via screw terminals.
Ambient conditions
Standard LCD: -35°C to +75°C
Backlit LCD display: -35°C to +35/75°C (depending on the intensity of the display)
Storage: -35°C to +85°C.
Weight
approx. 100 g
Scope of delivery
Device, fixing material, seal, operating instructions.
Customs tariff number:
9032 89 00
Manufacturer
Red Lion, USA
Download
Project planning software for CUB5 series, LD series, PAX and PAX2 series, PXU series, T/P16 series, T/P48 series, TCU series and ICM8.
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
Interface cards CUB5
CUB5COM1 - RS485 interface card
CUB5COM2 - RS232 interface card
CUB5USB0 - USB interface card
Housing CUB series
Steel or plastic housing for 1 device of the series
CUB4, CUB5 and DITAK8 series.
to top
Contact
Request form