Display

5-digit brilliant LCD display with 12.2 mm high digits, standard LCD or with red/green switchable backlight.
The intensity of the backlight can be adjusted in 5 levels.

Display area

-99999 to 99999

Entrance

1 input optionally adjustable via jumper:
Current: 0/4 mADC to 20 mADC, 0 to 50 mADC
Voltage: 0 VDC to 10 VDC
Response time of 500 msec.

Resolution

Current: 1 μA
Voltage: 1 mV

Accuracy

0.1 % of the set display range

Protection

Power supply is not galvanically isolated from the signal input.
Maximum input signals:
10 VDC: 30VDC
20/50 mA: 150mA

Function inputs

User input: Low active, delay time: 50 msec. when activating or deactivating,
typ. 5 ms for all other functions.
Programmable function (programming inhibit etc. see programming).
_VILmax= 1.0 V,_VIHmin=+2.4 V, _Vmax=+28 V

Indicators

Min./Max., adjustable unit

Operating modes

Min. / Max. Value memory

Relay output card with one switching output (option)

Type: Form-C relay, 1 A at 30 VDC or 0.3 A at 125 VAC.
Closing and opening delay: 4 mSec. max.
100,000 switching cycles min.

Transistor output card (option)

2 outputs type: NPN Open Drain MOSFET with galvanic isolation, 100 mA max., max. 30 Volt.

Interface card (option)

RS232:
Half-duplex (not isolated) 300 baud to 38400 baud.
RS485:
Transmission delay 2 mSec./min. or 50 mSec./min. adjustable.
2-wire/half-duplex (non-isolated), 300 baud to 38400 baud, up to 32 devices in the loop. Address 0 to 99.
USB:
Virtual COM port Baud rate: 300 baud to 38.4 kbaud. Connection type B, address: 0 to 99

Setting

Programming and operation via 2 front buttons (lockable) + Crimson software
SEL: Step to the next program section, save the programming or select the enabled display.
RST: Change parameters in the programming or reset minimum/maximum value or alarm output.

Programming

Programming is carried out via the two front buttons or via software (only with interface card). The simple and logically structured menu navigation allows very fast commissioning. Access rights can also be assigned.

Data backup

EEPROM

Protection class

Jet-proof and dust-tight to IP65 from the front.

Supply

Standard LCD display: 9 VDC to 28 VDC, max. 30 mA.
Backlit display: 9 VDC to 28 VDC, max. 125 mA.
230 VAC supply via direct screw-on power supply unit.

Ambient conditions

Operating temperature: Standard LCD: -35 °C to +75 °C,
Backlit LCD: -35 °C to +35 °C/+75 °C (depending on display intensity),
Storage temperature: -35 °C to +85 °C

Dimensions: (W x H x D)

75 mm x 39 mm x 44 mm,
Panel cut-out: DIN 68 mm x 33 mm

Assembly

Fastening via mounting frame

Connection

Via screw terminals.

Weight

approx. 100 g

Scope of delivery

Device, fixing material, seal, operating instructions.

Customs tariff number:

9030 33 70

Manufacturer

Red Lion, USA