FnIO module 4-channel digital output module, diagnostics, 24 VDC/2 A ST2524
records binary control signals and outputs control signals from the automation device to the connected actuators.
Delisting
If you have any questions, please contact our technical application consultants.
- The digital output module has four output channels
- Enables the direct connection of four actuators in 2-wire technology (four 0 V connections).
- The signal states of the channels are displayed with one green/red status LED per channel.
- The field and system levels are electrically isolated from each other.
Control signals from the automation device are transmitted to the connected actuators via the digital output module. All outputs are short-circuit proof. Field and system level are electrically isolated.
Power supply:
via system voltage 5 VDC
Power consumption:
max. 45 mA at 5 VDC
Isolation:
I/O and logic: optocoupler
Field voltage: none
Field voltage:
Nominal voltage: 24 VDC typical
Voltage range: 11 VDC to 28.8 VDC
Power loss: max. 5 mA at 28.8 VDC per channel
Cross sections:
I/O cable max. 2 mm²
Connection technology:
Removable connection level (terminal blocks)
Dimensions (WxHxL):
12 mm x 99 mm x 70 mm
Operating temperature:
-20 °C to 50 °C
Operating altitude:
max. 2,000 m
Assembly:
DIN rail
Number of outputs:
4 channels, positive logic
Output voltage range:
24 VDC typical, 11 VDC to 28.8 VDC
Minimum current when switched through:
1 mA/channel
Output current:
max. 2.0 A per channel, max. 8.0 A total
Configuration software for FnIO modules
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
Download (51.01 MB)
Here you can download our flyer "CODESYS - PLC - WebPanels a strong team for your application".
Download (1.39 MB)
Contact
Request form
