DMS data logger DCMB1xxxx

Home page

Product groups

Archive

Discontinued/listed products

Data logger

DCMB1XXXX

DMS data logger DCMB1xxxx
has been discontinued without replacement as of 01.08.2015.

1-channel compact data logger for strain gages and load cells
115,200 baud

Datasheet Technical support Request/On-site presentation

Multiple start/stop function
Storage of up to 1 million measurements
Fast download of measurement data
Battery status display
Password protection (optional)
Programmable alarm

Product description

The DCMB1XXXX compact data logger is a battery-operated strain
DMS data logger. Typical applications are the recording of
pressure via sensors such as load cells, strain gages, torque sensors
etc.. The non-volatile internal memory enables a high level of data
data security, even if the battery is used up. The
data logger can be easily set, started and stopped via the PC.
stopped by the PC. A button on the data logger can be used to
start/stop, even without a PC. The comprehensive and
user-friendly software automatically recognizes the connected
automatically recognizes the connected data logger and allows easy evaluation of the
measurement data.

Technical data

DCMB11030

- Measuring range: +/-30 mV
- Accuracy: +/-0.01 %; +/-3μV (of the entire value range)
- Resolution: 1 µV
- Input range: 0 V to 2.5 V
- Reference voltage: 2.5 V

DCMB11150

- Measuring range: +/-160 mV
- Accuracy: +/-0.01 %; +/-16μV (of the entire value range)
- Resolution: 5 µV
- Input range: 0 V to 2.5 V
- Reference voltage: 2.5 V

DCMB11000

- Measuring range: +/-1200 mV
- Accuracy: +/-0.01 %; +/-120μV (of the entire value range)
- Resolution: 50 µV
- Input range: 0 V to 2.5 V
- Reference voltage: 2.5 V

Measuring interval:

4 measurements/second to 1 measurement/24 hours.

Memory:

1,000,000 measurements; ring memory can be activated via software
can be activated, 330,000 measurements with multiple start/stop.

Start mode:

- direct start
- Delayed start (up to 24 months in advance)
- Multiple start via push-button

Stop mode:

- Manually via software
- Scheduled (time and date)
- multiple stop via push-button

Multiple start/stop mode:

Multiple start/stop of the device without
data download or communication with the PC.

Start/stop via button:

Start device: Press and hold the button for 5 seconds.
The data logger starts recording.
Stop device: Press and hold the button for 5 seconds.
The red LED flashes for 3 seconds and the green LED for 2 seconds.
The data logger has finished recording.

Real-time viewing:

The data logger can be used in conjunction with a
PC for direct viewing and storage of the measurement data.
can be used.

Password protection:

Optionally, a password can be assigned to the device
to secure access to the device settings. Data
cannot be read out without the password.

Time accuracy:

+/-1 minute per month at 20 °C operating temperature
(without connection to the PC).

Supply:

Replaceable 3.6 V lithium battery (included) with a typical service life of
typical service life of 10 months, depending on the measuring interval
and at a load of 350 Ohm.
2 years at a measuring interval of 1 measurement/minute at a load of
1000 Ohm.

Interface:

USB interface (interface cable required,
see accessories); 115,200 baud.

Ambient temperature:

-40 °C to +80 °C, 0 %rh to 90 %rh (non-condensing).
condensing).
The data logger can only be used with the DCMIFC200 interface cable (USB)

The data logger can only be used with the DCMIFC200 interface cable (USB)