Display:

2-line LED display
Upper line: Actual value, 4 digits, green with 10.2 mm digits
Lower line: setpoint, 4 digits, red with 7.6 mm digits

Indicators:

Two red indicators for the status of the relay outputs and
one yellow indicator for serial communication.
C1,C2: ON when output is active.
R: ON for serial communication

Keyboard:

3 buttons for programming and setting the
setpoint.

Inputs:

Three digital inputs adjustable as PNP, NPN or TTL.
Programmable switching thresholds for activation as high active/low
active/rising edge or level-controlled.

Function inputs:

Start, stop, hold, reset, wait,
Setpoint setting (I3).

Time ranges:

Programmable time ranges (hundredths of a second, tenths of a second, second, minute, hour).

Relay output:

2 NO contacts with 8 A @ 250 VAC. Programmable
as normally open or normally closed contact.

Power supply:

24 VAC/DC to 230 VAC/DC +/-15 %, 50/60 Hz; 2W

Housing:

Black, impact-resistant plastic housing.

Dimensions:

W 48 mm x H 48 mm x D 107 mm. Panel cut-out
46 mm x 46 mm. Fastening via mounting frame with screws.
Recommended thickness of the switch panel 2 to 6 mm.

Ambient conditions:

Operating temperature: 0 °C to +45 °C;
Relative humidity 35% to 95 %rh, non-condensing.

Programming:

Programming and operation is menu-guided via
the front buttons. With the programming module, the controller can
also be programmed using software that runs under Windows™.
be programmed. This software is compatible with Windows 7 and Windows 10.
The memory card has an internal battery.
This makes it possible to program the devices without connecting the
supply (up to 1,000 programs with one battery).

Data protection:

Password-protected access to setpoint, alarm values
and parameters.

Scope of delivery:

Device, fixing material, seal, operating instructions.

Certificates:

UL, CE, RoHS

Customs tariff number:

9026 80 20

Manufacturer:

Wachendorff Prozesstechnik GmbH & Co. KG