Display:

2-line LED display
Upper line: Actual value, 4-digit, green with 10.2 mm digits
Lower line: setpoint, 4 digits, red with 7.6 mm digits

Indicators:

Two red indicators for relay output status and one yellow indicator for serial communication.
1, 2 ON when output is active.
R ON for serial communication
The display of the maximum or minimum value is indicated by a short
short text in the 1st line.

Keyboard:

4 buttons for programming and setting the setpoint.

Inputs:

Three digital inputs adjustable as PNP, NPN or TTL.
Programmable switching thresholds for activation as high active/low active/rising edge or level-controlled.
See also table under Drawings Input signal/logic level

Input frequency:

maximum 100 kHz.

Relay output:

1 changeover relay with 5 A @ 250 VAC and 1 NO contact with 5 A @ 250 VAC.

Sensor supply:

24 VDC
30 mA with 24 VAC supply
40 mA with 24 VDC supply
60 mA with 110 to 230 VAC supply.

Power supply:

24 VAC/DC to 230 VAC/DC +/-15%, 50/60 Hz; 2W.

Data protection:

Password-protected access to setpoint, alarm values and parameters.

Programming:

Programming and operation is menu-guided via the front buttons.
With the programming module, the controller can also be programmed using Windows™ software. This software is compatible with Windows 7 and Windows 10. The memory card has an internal battery. This makes it possible to program the devices without connecting the power supply (up to 1,000 programs with one battery).

Protection class:

Water jet-proof and dust-tight to IP65 from the front (with seal), rear protection class IP20.

Dimensions:

W 77 mm x H 35 mm x D 53 mm.
Panel cut-out:
8.5 mm x 70.5 mm.
Fastening via mounting frame with plastic clamping bracket.
Recommended thickness of the switch panel 2 mm to 8 mm.

Ambient conditions:

Operating temperature: 0 °C to +45 °C;
Relative humidity: 35% to 95% rH, non-condensing.

Weight:

approx. 100 grams.

Scope of delivery:

Device, mounting material, seal, operating instructions

Certificates:

UL, CE, RoHS

Customs tariff number:

9026 80 20

Manufacturer:

Wachendorff Prozesstechnik GmbH & Co. KG