Module for DMS strips CSSG
1 to 2 inputs optional: ±20,000 mVDC, ±33,0000 mVDC, ±200,000 mVDC.
Delisting
If you have any questions, please contact our technical application consultants.
- Cost-effective and fast replacement thanks to hot swap
- Automatic addressing minimizes configuration time
- Configuration via WIndows software
The new modular controller series consists of a master module and up to 16 different slave modules. The PID controller module CSPID is a complete controller that can be combined with up to 15 other modules to form a multi-zone control system. Thanks to its innovative design, a module can be replaced without removing the power supply and without reconfiguration (hot swap). This significantly reduces downtime in the event of a module failure.
The PID controller module is configured to process a wide range of input signals from the field of thermocouples and resistance thermometers as well as standard signals. The control and alarm outputs are relays or optional SSR relays and can be assigned to up to 7 alarms in addition to the control output. The controller regulates in PID mode and can be optimized for heating and cooling thanks to the option of self-optimization. Extremely fast control behavior, low overshoot, optional analog outputs and simple programming via clear software round off the overall picture.
The 10Base-T Ethernet interface of the master module also enables the network connection of this new innovative series.
Inputs:
CSSG10RA/CSSG10SA:
1 input optional: ±20,000 mVDC, ±33,000 mVDC, ±200,000 mVDC
CSSG11RA/CSSG11SA:
2 inputs optional: ±20,000 mVDC, ±33,000 mVDC, ±200,000 mVDC
Outputs:
Output 1 and 2 available as solid state NFET, relay form A or triac
Output 3 relay form C
Solid state: N-channel open drain MOSFET max. 30 VDC at 1 A
Form A relay: normally closed / normally open 3 A at 125 VAC
Form C Relay: Changeover contact 5 A at 125 VAC/28 VDC
Analog output:
0 VDC to 10 VDC,
0/4 mA to 20 mA
Accuracy
Input: 0.02 % of the display value + 3 μV to 30 μV
depending on the range (18 °C to 28 °C)
Analog output: 0.1 % of the display range (18 °C to 28 °C)
Scaling
Offset
Resolution
Input: 16 bit
Analog output current: 1 μA
Analog output voltage: 500 μV
Sampling rate
67 ms
Interfaces
Communication via CS master
Memory
Non-volatile memory for all program parameters.
Master module also saves the parameters.
Indicators
LEDs:
Status
Output 1 to 3
Alarm
Insulation
500 Vrms for 1 minute between supply and signal inputs
Supply
Via base connector of the master module.
Replacement possible when supply voltage is applied.
Ambient conditions
Working temperature: 0 °C to +50 °C
Storage temperature: -40 °C to +85 °C
Weight
200 g
Assembly
35 mm DIN rail
Housing
Flame and scratch-resistant plastic housing.
Contact
Request form