Entrance

Timer inputs: 2 control inputs Low Active.
Control: Relay, PNP/NPN, open collector.

Resolution

Timer: min. 0.001 s, max. 1h

Accuracy

Timer: ±0.01 % of the display value

Display

Timer: 7-digit, 12 mm high brilliant LCD, with "t" indicator, minimum resolution
resolution: 0.001 second, maximum resolution: 1 hour,
Accuracy: +/-0.01 %.
Cycle counter: 6-digit, 12 mm high brilliant LCD, with "C" indicator,
maximum counting frequency: 10 Hz
Maximum counting frequency at input B500 Hz (filter deactivated).
Standard LCD or with red/green switchable backlighting
(the intensity can be selected in 5 levels).

Keys

SEL: Switch between timer and cycle counter display. Access to programming level and saving of parameters.
RST: Reset. These buttons are also used to program the timer/counter and can be locked.

Timer inputs

Logic inputs active low, pulse width 1 msec.
Min., timer start/stop response time 1 msec. Max. input filter to be activated via programming to prevent contact bounce.
Control input A: internal pull-up resistor 7.8 kOhm,
_VILmax= 1.25 V,_VIHmin=+2.75 V, _Vmax=+28 V
Control input B: internal pull-up resistor 10 kOhm,
_VILmax= 1.0 V,_VIHmin=+2.4 V, _Vmax=+28 V

Display area

Timer: 0 to 9999999
Cycle counter: 0 to 999999
18 adjustable time formats: s, m, h, ms, hm, hms, Thm, ...

Function inputs

User input: USER INPUT: Low active, response time: 5 msec. typical, (on/off: 50 msec.)
Programmable function (programming inhibit etc. see programming).
Internal pull-up resistor 10 kOhm,
_VILmax= 1.0 V,_VIHmin=+2.4 V, _Vmax=+28 V

Operating modes

Timer
Time relay
Cycle counter

Relay output card with one switching output (option)

Type: Form-C relay, 1 A at 30 VDC or 0.3 A at 125 VAC.
Closing and opening delay: 4 mSec. max.
100,000 switching cycles min.

Interface cards (option)

RS232:
Half-duplex (not isolated) 300 baud to 38400 baud.
RS485:
Transmission delay 2 mSec./min. or 50 mSec./min. adjustable.
2-wire/half-duplex (non-isolated), 300 baud to 38400 baud, up to 32 devices in the loop. Address 0 to 99.

Programming

Programming is carried out via the two front buttons or via software (only with interface card). The simple and logically structured menu navigation allows very fast commissioning. Access rights can also be assigned.

Data backup

EEPROM

Supply

Standard LCD display: 9 VDC to 28 VDC, max. 30 mA.
Backlit display: 9 VDC to 28 VDC, max. 125 mA.
230 VAC supply via direct screw-on power supply unit.

Protection class

Jet-proof and dust-tight to IP65 from the front.

Ambient conditions

Operating temperature: Standard LCD: -35 °C to +75 °C,
Backlit LCD: -35 °C to +35 °C/+75 °C (depending on display intensity),
Storage temperature: -35 °C to +85 °C

Connection

About screw terminals

Dimensions: (W x H x D)

75 mm x 39 mm x 44 mm,
Panel cut-out: DIN 68 mm x 33 mm

Assembly

Fastening via mounting frame, screw connections (connection)

Weight

approx. 100 g

Scope of delivery

Device, fixing material, seal, operating instructions.

Accessories

Power supply unit for 85 to 250 VAC/12 VDC, 400 mA.

Customs tariff number:

9032 89 00

Manufacturer

Red Lion, USA