FnIO module - 4-channel voltage output module ST4424
outputs signals of the normalized value 0 VDC to 10 VDC
Delisting
If you have any questions, please contact our technical application consultants.
- The analog output module outputs voltage signals from 0 VDC to 10 VDC
- Galvanic isolation of the output signal from the system level with a resolution of 12 bits
- Power supply via internal system voltage
- Common ground potential of the output channels

The 4-channel current output module outputs signals of the standardized value 0 VDC to 10 VDC. The output signal is electrically isolated from the system level with a resolution of 12 bits. The field voltage is used as the power supply for the current output modules.
Power supply:
via system voltage 5 VDC
Power consumption:
max. 60 mA at 5 VDC
Cross sections:
I/O cable max. 2 mm²
Connection technology:
Removable connection level (terminal blocks)
Dimensions (LxHxW):
12 mm x 99 mm x 70 mm
Operating temperature:
0 °C to 55 °C
Assembly:
DIN top-hat rail
Number of outputs:
4 channels single ended
Indicators:
1 x green/red for FnBus status
Resolution in steps:
12 bit with 2.44 mV/bit
Output voltage range:
0 VDC to 10 VDC
Data width:
16 bit integer (2's complement)
Load resistance:
min. 2 kOhm
Conversion time:
4 ms/all channels

Configuration software for FnIO modules
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.


Here you can download our flyer "CODESYS - PLC - WebPanels a strong team for your application".



