Entrance:

NAMUR, phototransistor (impedance 1 kOhm), reed, AICHI,
Switch according to IEC1131 - Type 1, 2- or 3-wire NPN / PNP with 12 V or
22 V adjustable via DIP switch, maximum 400 Hz, maximum 28 V.

Sensor supply:

8V ±0.6 V, 12 V ±1 V and 22 V ±2 V with 22 mA
continuous load (approx. 35 mA peak). Sensor supply approx. 40 Ohm impedance.

Output:

2 simultaneous outputs, 1x PNP, 1x NPN, maximum 200 mA
per output, 30 V permanent and 50 V peak. Protected via a
self-repairing fuse.

Supply:

19.2 VDC to 30 VDC, power is supplied via the terminals or via the K-bus.

Short-circuit resistance:

1,500 VAC between input and supply/output 2-way.

Safety:

EN61010-1:2013-10

EMC:

EN61000-6-2:2006-10
EN61000-4-4:2013-01
EN61000-6-4:2007-11 + A1:2013-01
EN61000-4-5:2015-05
EN61000-4-2:2011-04
EN61000-4-6:2014-09
EN61000-4-3:2007-04 + A1:2009-01 + A2:2011-01
EN61000-4-11:2006-02

Ambient conditions:

0 % to 90 % relative humidity
Operation: -10 °C to +65 °C.
Storage: -40 °C to +85 °C

Connection:

Spring terminals from 0.2 mm² to 2.5 mm².

Housing:

Robust plastic housing made of PBT.

Protection:

IP20

Dimensions (WxHxD):

6.2 mm x 102.5 mm x 93.1 mm.

Weight:

approx. 45 g.

Scope of delivery:

Device, operating instructions.

Manufacturer:

Seneca s.r.l.. Italy