Entrance

2 inputs optionally adjustable: PNP or NPN

Resolution

Timer display: 0.001 s

Accuracy

Timer: ±0.01 % of the display.

Display area

Timer display: 999999, 23 adjustable time ranges
Cycle counter display: 0 to 999999

Indicators

Timer display, counter display
TMR = Timer function
CNT = Display for switching cycles
SP1 = Output 1 is active
SP2 = Output 2 is active
SP3 = Output 3 is active
SP4 = Output 4 is active

Keys

The device is programmed and operated using the 5 push buttons on the front.

Function inputs

3 programmable inputs for different functions
functions. PNP- or NPN-switching via jumper
adjustable via jumper.

Operating modes

Various selectable e.g: Start/stop with one or two
two sensors, automatic reset at start, etc.

Outputs

Equipped with an interface card, a relay or transistor
transistor output card or real-time clock card.

Setting

The device is set via 5 front buttons or software.

Insulation

PAXTM000: 2300 Vrms for 1 minute to all inputs and outputs.
PAXTM010: 500 Vrms for 1 minute to all inputs and outputs.

Sensor supply

12 VDC, ±10 %, max. 100 mA, short-circuit proof

Supply

PAXTM00 0/B: 85 VAC to 250 VAC 50/60 Hz, 18 VA
PAXTM01 0/B: 11 VDC to 36 VDC, 14 W or 24 VAC ±10 %, 50/60 Hz, 15 VA

Ambient conditions

Operating temperature: 0 °C to +50 °C. 0 °C to +45 °C
when equipped with 3 expansion cards.
Storage temperature: -40 °C to +60 °C

Dimensions

(W x H x D) 97 mm x 50 mm x 104 mm,
Panel cut-out according to DIN 92 mm x 45 mm.

Assembly

Mounting frame with clamping screws, connection via
terminal strip.

Approvals:

UL approval (Underwriters Laboratories) for the USA and Canada

Weight:

approx. 300 g (without plug-in options).

Scope of delivery:

Device, fixing material, seal, operating instructions.

Customs tariff number:

9032 89 00

Manufacturer:

Red Lion, USA.

Output cards:

The device can be very easily upgraded with various output cards. Each device can be equipped with a maximum of one interface card, one relay or transistor output card and one analog output card. You can easily install the cards yourself.

Pluggable interface card:

1. half-duplex RS232, programmable
2. multipoint RS485, programmable
3. DeviceNet, programmable
4. PROFIBUS-DP, programmable
5. ModBus, programmable (via RS485 or RS232 interface)

Pluggable relay output cards:

• 2 x relay changeover contact 5 A at 120/240 VAC or 28 VDC (resistive load), at 120 VAC (90 VA inductive load). Service life of the relays is 100,000 cycles at max. load. The service life increases with lower loads.
• 4 x NO relay 3 A at 240 VAC or 30 VDC (resistive load), at 120 VAC (70 VA inductive load). Service life of the relays is 100,000 cycles at max. load. The service life increases with lower loads.

Pluggable transistor output cards:

• 4 x NPN-OC transistors: max. 100 mA at _Vsat = 0.7 V, _Vmax 30 V, galvanic isolation of 500 V against the signal input.
• 4 x PNP-OC transistors: Internal supply: 24 VDC +/-10 %, max. 30 mA all 4 transistors. External supply: max. 30 VDC, 100 mA for each individual transistor.

Plug-in real-time clock card:

Time accuracy +/- 5 sec/month after setting by the user. Internal lithium button cell battery with a service life of approx. 10 years. Synchronization via RS482 interface with up to 32 devices possible. 500 Vrms insulation for 1 minute to ground of the timer and user inputs.

Programming on the device

Programming is possible if the programming lock input is not activated. All necessary parameters can then be set using the 5 front buttons. Programming is organized in individual sections.

Programming with PC software

With the Crimson 2 Windows software, all project data can be easily created, managed, copied, registered and transferred to the PAX device on the PC. A starter package consisting of software, RS 232 interface card and PC/PAX connection cable makes it easier to decide in favor of this programming.