Display:

LED display, 5 digits,
red with 16 mm high digits
Display range measured value:
-1,999 to 30,000
Display range total:
0 to 9,999,999,999
(alternating display)

Entrance areas

Input signal setting via keypad.
Thermocouple: type J, K,T,N,R,S,B,E; reference junction: internal
Temperature sensor: Pt100 in 3-wire (alpha = 0.00385)
Linear inputs: 0 V to 5/10 V,
0/4 mA to 20 mA, 0 mV to 50 mV

Indicators:

Ten red indicators for alarm statuses, serial communication, totalizing function, minimum and maximum value.
°C,°F: ON, depending on selection for temperature display
TX, RX, USB: ON, if communication via interface
A1,A2: ON if an alarm is pending
TOT: ON if total is displayed
HIGH: ON if the 6th to 10th digit of the total is displayed
LOW: ON when 1st to 5th digit of the total is displayed

Keyboard:

4 buttons for programming and setting the setpoints.

Accuracy:

Thermocouples type J,K,T,E: 0.25 % of span ±1 °C
Thermocouples type N,R,S,B: 0.25 % of span ±3 °C
Pt100: 0.2 % of span
Linear analog input: 0.2 % of span

Measuring ranges Sensor types

Thermoel.type J: -110 ºC to 950 ºC (-166 ºF to 1742 ºF)
Thermoel.type K: -150 ºC to 1370 ºC (-238 ºF to 2498 ºF)
Thermoel.type T: -160 ºC to 400 ºC (-256 ºF to 752 ºF)
Thermoel.type N: -270 ºC to 1300 ºC (-454 ºF to 2372 ºF)
Thermoel.type R: -50 ºC to 1760 ºC (-58 ºF to 3200 ºF)
Thermoel.type S: -50 ºC to 1760 ºC (-58 ºF to 3200 ºF)
Thermoel.type B: 400 ºC to 1800 ºC (752 ºF to 3272 ºF)
Thermoel.type E: -90 ºC to 730 ºC (-130 ºF to 1346 ºF)
Pt100: -200 ºC to 850 ºC (-328 ºF to 1562 ºF)

Resolution:

Internal resolution with 65,535 steps (16 bit),
Display resolution 32,000 steps.

Measuring cycle:

55 Hz with programmable digital filter

Input impedance:

Thermocouple, Pt100,
0 to 50 mV: >10 MOhm;
0 to 5/10 V: >500 kOhm;
0/4 to 20 mA: 100 Ohm

Protection class:

Water jet-proof and dust-tight from the front in accordance with IP65 (with
seal), rear protection class IP20.

Housing:

Plastic housing made of polycarbonate (PC) L94-V2.
Back made of ABS + PCUl94 V-0.

Dimensions:

W 96 mm x H 48 mm x D 35 mm.
Panel cut-out according to DIN: 93.0 x 45.5 mm.

Fastening:

With lockable plastic clamping brackets.

Ambient conditions:

Operating temperature: 0 °C to +50 °C;
relative humidity 80 %rh @ 30 °C, for temperatures above 30 ºC,
reduction of 3 %RH per ºC.

Serial interface:

Mini-USB (virtual COM port).

Sensor supply:

24 VDC +/- 15 % @ 50 mA

Relay output:

2 NO contacts with separate earth,
1.5 A at 240 VAC/30 VDC.

Power supply:

100 VAC to 240 VAC ±10 %,
50/60 Hz, 6 VA

Connection:

Via plug-in screw terminals.

Dimensions:

W 96 mm x H 48 mm x D 35 mm. Panel cut-out according to DIN:
93.0 x 45.5 mm. Fastening via lockable plastic clamping brackets.

Scope of delivery:

Device, fixing material, seal, operating instructions.

Customs tariff number:

9030 33 70

Manufacturer:

Wachendorff Prozesstechnik GmbH & Co. KG