Standard signal display for current PAXLCL
3 1/2 digit digital display for process signals.
- PAX Lite series digital displays
- Large series of robust digital displays for many areas of automation technology
- Individually backlit physical unit
- Simple scaling via spindle potentiometer
- 24 VDC sensor supply
- Robust injection-molded plastic housing
- High protection class IP 65
The PAXLCL display is an inexpensive display for all devices and sensors that output process signals and whose measurement results need to be displayed with high precision. It is used in almost all areas and helps to automate and simplify work processes. All physical variables that are recorded by a transducer that provides an output for 0/4 mA to 20 mA can be scaled and displayed in the desired physical unit.
Entrance:
4 -20 mA (260 steps/mA)
10 - 50 mA (105 steps/mA)
Voltage drop at maximum input signal less than 600 mV for both input ranges.
Display:
3½-digit, 14 mm high LED.
Linearity:
+/- 0.05% +/- 1 digit.
Maximum load:
Indication of overrange by flashing of the last 3 digits.
Maximum input current 170 mA.
Scaling:
The input range and offset are scaled via DIP switches and potentiometers.
Span: Adjustable via 32 steps (binary DIP switch combination) and via potentiometer. Maximum resolution 8.125 numerical units/mA at 4-20 mA and 3.25 units/ma at 10-50 mA.
Offset: Adjustable via 16 steps (binary DIP switch combination) and via potentiometer. The offset can be negative or positive. The maximum offset is +/- 2700.
Measuring rate:
2.5 measurements/second
Decimal point setting:
The setting is made via 3 DIP switches located in the device.
Backlit unit:
A physical unit can easily be attached behind the display by opening the device from behind. With the label sheet, which contains all the usual units, the user can realize his desired backlit unit. The backlighting is switched on and off via DIP switches.
Sensor supply:
24 VDC at 50 mA max.
Power supply:
85-250 VAC, ±10%, 50/60 Hz, 6 VA, switchable.
Protection class:
Jet-proof and dust-tight to IP65 from the front.
Housing:
Robust plastic housing. W 97 mm x H 50 mm x D 104 mm
Panel cut-out
DIN 92 mm x 45 mm
Fastening
About mounting frame with clamping screws
Connection
Via terminal strip on the rear
Ambient temperature:
Operation: 0 to 60°C.
Storage: -40 to 80°C.
Weight
approx. 540 g
Scope of delivery
Device, mounting material, seal, operating instructions
Customs tariff number:
9029 20 38
Manufacturer
Red Lion Controls, USA
How photovoltaics becomes economical
Download (543.04 KB)
Price-efficient digital displays for mass flow measurement
Download (429.65 KB)
Digital displays in the tensile force measurement
Download (360.06 KB)
Filter monitoring via two separate channels - flexible and accurate
Download (461.86 KB)
to top
Contact
Request form