Universal display PAXD
5-digit digital display, 85 VAC to 250 VAC supply or 11 VDC to 36 VDC/24 VAC supply.
- Large series of programmable digital displays for machines, systems, test bay, laboratory
- 5-digit, 14 mm high LED, indicators, backlit selectable unit
- Input ranges: ± 200 mVDC - ± 300 VDC / ± 200 µADC - ± 2 ADC
- 20 measurements/sec.
- pluggable options: 4 limit values, analog output: 0/4-20 mA, 0-10 V
- interfaces: Profibus DP, RS232, RS485, Device Net
- Easy programming on the device or via PC
- Summation, min/max value, 16-step linearization
- Power supply: 85-250 VAC, 11-36 VDC/24 VAC
- High protection class IP 65
The PAX D industrial digital display can of course also be used as a very flexible and accurate laboratory device. However, with its robust plastic housing and high protection class IP 65, it has been designed for harsh industrial use. The device is configured quickly and safely either via the PC or directly using 5 keys. The operator is pleased with the clear user interface with which he can easily record all parameters at a glance and easily change values. Devices can also be retrofitted using the plug-in options. A wide range of DC voltage, DC current and resistance signals are accepted. The range is set via jumpers and in the programming. The accuracy in the following range table is given as a percentage of the display value. The protection corresponds to the max. permissible input signal.
Entrance area:
Current: ± 200 µADC to ± 2 ADC
Voltage: ± 200 mVDC to ± 300 VDC
Resistance/Potentiometer: 100 Ohm, 1000 Ohm, 10 KOhm
Display
5-digit, 14 mm high red LED
Backlit unit
A physical unit can easily be attached behind the display by opening the device from behind. With the label sheet, which contains all the usual units, the user can easily realize his desired backlit unit. The backlighting is switched on or off in program section 4.
Indicators
- MAX: Maximum value is displayed
- MIN: Minimum value is displayed
- TOT: Total is displayed, flashes on overflow
- SP1: Output 1 is active
- SP2: Output 2 is active
- SP3: Output 3 is active
- SP4: Output 4 is active
Keys
The device is programmed and operated using the 5 push buttons on the front.
Operation
The clear user interface with the display of all relevant values, the indicators and the unit enable quick operation. The device is operated via 5 front buttons. During programming, it is determined which displays and entries are possible or remain locked after activation of the programming lock. The PAR button is used to scroll through the individual setpoints, which can be changed using the F1 and F2 buttons. The F1 and F2 function keys can each be assigned 2 functions. The second function is activated by pressing the button for 3 seconds.
User inputs
3 programmable inputs are available. They can be set to PNP or NPN switching via jumpers. Protection: max. 30 volts.
- NPN: Active Vin < 0.7 VDC, Inactive Vin > 2.5 VDC
- PNP: Active Vin > 2.5 VDC, Inactive Vin < 0.7 VDC.
Totalizer
The totalizer can create a product from the input signal and time. It can either totalize automatically over a time or with a user input. A time base and a factor make the unit flexible. It has 9 digits and it is possible to change between the first 4 and the second 5 digits. The accuracy of the time base is typically 0.01%.
Power supply
PAXD000 0/B: 85 to 250 VAC 50/60 Hz, 15 VA.
PAXD001 0/B: 11 to 36 VDC, 11 W or 24 VAC +/-10 %, 15 VA.
Customs tariff number:
9030 33 70
Project planning software for CUB5 series, LD series, PAX and PAX2 series, PXU series, T/P16 series, T/P48 series, TCU series and ICM8.
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
How photovoltaics becomes economical
Download (543.04 KB)
Price-efficient digital displays for mass flow measurement
Download (429.65 KB)
Digital displays in the tensile force measurement
Download (360.06 KB)
Filter monitoring via two separate channels - flexible and accurate
Download (461.86 KB)
to top
Contact
Request form