Display

5-digit brilliant LCD display with 12.2 mm high digits, standard LCD or
with red/green switchable backlight. The backlighting
is adjustable in intensity in 5 levels.

Display area

-99999 to 99999

Entrance

0 to 200 µA, 2 mA, 20 mA, 200 mA optionally adjustable via jumper.
Response time of 500 msec.

Resolution

10 nA to 10 μA depending on the selected range.

Accuracy

0.1 % of the set display range

Protection

Power supply is not electrically isolated from the signal input.

Max. input current:

200 µA: 15 mA
2 mA: 50 mA
20 mA: 150 mA,
200 mA: 500 A

Scaling

Freely scalable

Indicators

Min/Max, adjustable unit

Function inputs

User input: Low active, delay time: 50 msec. when activating or deactivating,
typ. 5 ms for all other functions.
Programmable function (programming inhibit etc. see programming).
_VILmax= 1.0 V,_VIHmin=+2.4 V, _Vmax=+28 V

Operating modes

Min./Max. Value memory

Relay output card with one switching output (option)

Type: Form-C relay, 1 A at 30 VDC or 0.3 A at 125 VAC.
Closing and opening delay: 4 mSec. max.
100,000 switching cycles min.

Transistor output card (option)

2 outputs type: NPN Open Drain MOSFET with galvanic isolation, 100 mA max., max. 30 Volt.

Interface cards (option)

RS232:
Half-duplex (not isolated) 300 baud to 38400 baud.
RS485:
Transmission delay 2 mSec./min. or 50 mSec./min. adjustable.
2-wire/half-duplex (non-isolated), 300 baud to 38400 baud, up to 32 devices in the loop. Address 0 to 99.
USB:
Virtual COM port Baud rate: 300 baud to 38.4 kbaud. Connection type B, address: 0 to 99

Setting

Programming and operation via 2 front buttons (lockable) + Crimson software.
SEL: Step to the next program section, save the programming or select the enabled display.
RST: Change parameters in the programming or reset minimum/maximum value or alarm output.

Programming

Programming is carried out via the two front buttons or via software (only with interface card). The simple and logically structured menu navigation allows very fast commissioning. Access rights can also be assigned.

Data backup

EEPROM

Supply

Standard LCD display: 9 VDC to 28 VDC, max. 40 mA.
Backlit display: 9 VDC to 28 VDC, max. 125 mA.
230 VAC supply via directly screw-on power supply unit (see accessories).

Protection class

Jet-proof and dust-tight to IP65 from the front.

Ambient conditions

Operating temperature: Standard LCD: -35 °C to +75 °C,
Backlit LCD: -35 °C to +35 °C/+75 °C (depending on display intensity)
Storage temperature: -35 °C to +85 °C

Dimensions: (W x H x D)

75 mm x 39 mm x 44 mm,
Panel cut-out: DIN 68 mm x 33 mm

Assembly

Fastening via mounting frame, screw connections (connection).

Connection

About screw terminals

Weight

approx. 100 g

Scope of delivery

Device, fixing material, seal, operating instructions.

Customs tariff number:

9030 33 70

Manufacturer

Red Lion, USA