Voltage display CUB5V
5-digit digital display for DC voltage
- programmable input for DC voltage up to 200 VDC
- free scaling
- 5-digit, 12 mm high brilliant LCD display or red/green backlit display
- front protection class IP65
- Easily programmable via front buttons or via software
- Minimum and maximum value memory
- Configurable physical unit of measurement
- Optional relay output card
- Optional transistor output card
- Optional RS232/RS485 or USB interface
The CUB5V is a low-cost digital display for DC voltage. It is programmed via the two front buttons or optionally via software and was developed for harsh industrial operation. The display is available as a standard LCD or backlit red/green. Thanks to the free scaling, the minimum and maximum value memory, the configurable unit and the optional upgrade with up to 2 switching outputs and optional interface, the CUB5V has a very good price/performance ratio.
Display
5-digit, 12 mm high LCD, standard or with red/green, switchable and dimmable backlight. The intensity of the backlighting can be adjusted in 5 stages.
Keys
SEL: Step to the next programming section, save the programming or select the enabled display.
RST: Change the parameters in the programming or reset the minimum/maximum value or alarm output.
Entrance
0 VDC to 200 mVDC, 2 VDC, 20 VDC, 200 VDC adjustable via jumper. Response time of 500 msec.
Accuracy
0.1% of the set display range.
Protection
Voltage input is not galvanically isolated from the signal input. Maximum input voltage:
200 mVDC / 2 VDC: 75 VDC
20 VDC / 200 VDC: 250 VDC
User input
Low-active, delay time: 50 ms for activation or deactivation, typ 5 ms for all other functions. Programmable function (see programming).
VIL max= 1.0 V , VIHmin = +2.4 V , Vmax = +28 V.
Relay output card with one switching output (option)
Form-C relay, 1 A at 30 VDC or 0.3 A at 125 VAC.
Closing and opening delay: 4 msec. Max.
100,000 switching cycles min.
Transistor output card (option)
2 outputs Type: NPN Open Drain MOSFET without galvanic isolation, 100 mA max,
max. 30 Volt
Interface card (option)
RS485: Transmission delay mSec. or 50 mSec. adjustable. Baud rate 300 to 38,400, 2-wire/half-duplex (not isolated), multi-point, up to 32 devices. Address 0 to 99
RS232: Baud rate 300 to 38,400, half-duplex, non-isolated
USB: Baud rate 300 to 38,400, virtual COM port. Address: 0 to 99
Programming
Programming is carried out via the two front buttons or via software (only with interface card). The simple and logically structured menu navigation allows very fast commissioning. Access rights can also be assigned.
Data backup
EEPROM
Protection class
Jet-proof and dust-tight to IP65 from the front.
Power supply
9 VDC to 28 VDC, standard LCD: max. 40 mA, with backlight max. 125 mA. 230 VAC supply via directly screw-on power supply unit (see accessories).
Housing
Plastic housing W 75 mm x H 39 mm x D 44 mm. Panel cut-out: DIN 68 mm x 33 mm. Mounting via mounting frame.
Connection
via screw terminals
Ambient temperature
Standard LCD: -35°C to +75°C
Backlit LCD: -35°C to +35/75°C (depending on display intensity)
Bearing: -35°C to +85°C
Weight
approx. 100 g
Scope of delivery
Device, mounting material, seal, operating instructions
Customs tariff number:
9030 33 70
Manufacturer
Red Lion, USA
Download
Project planning software for CUB5 series, LD series, PAX and PAX2 series, PXU series, T/P16 series, T/P48 series, TCU series and ICM8.
By downloading and using software and apps from this website, I agree to the GTC and the supplementary software clause.
Interface cards CUB5
CUB5COM1 - RS485 interface card
CUB5COM2 - RS232 interface card
CUB5USB0 - USB interface card
Housing CUB series
Steel or plastic housing for 1 device of the series
CUB4, CUB5 and DITAK8 series.
to top
Contact
Request form