Entrance

NPN, PNP sensors, CMOS, TTL, potential-free contacts and permanent magnet sensors are accepted.
permanent magnet sensors are accepted. Setting via DIP switch.
Attenuation adjustable to 50 Hz.

Operating modes:

• 4-digit large display: simple piece counter ( LDx00400 )
• 6-digit large display: single piece counter (LDx00600)
• 6-digit large display: 2-fold counter, addition or subtraction with direction recognition can be set; additional 5-digit tachometer function (LDx006P0). Tachometer function (LDx006P0).

cut-off frequency:

LD200400, LD200600, LD400400 and LD400600: 25 kHz max.
LD2006P0 and LD4006P0:
without active switching output: 25 kHz
(except for phase diskr. x 4: 23 kHz)
with active switching output: 20 kHz
(except 2 counters: 14 kHz,
Phase discr.x2: 13 kHz,
phase discr.x4: 12 kHz)

Tachometer (LD2006P0 and LD4006P0):

5-digit ; Minimum input frequency 0.01 Hz ; Accuracy +/-0.01%

Display (dimmable):

4-digit, 57 mm or 101 mm high red LED (LDx00400).
6-digit, 57 mm or 101 mm high red LED. (LDx00600 / LDx006P0).

scaling (LD2006P0 and LD4006P0):

Both counters and the speedometer can be scaled independently of each other.
scaled independently of each other. Free decimal point setting.

Sensor supply:

+24 VDC, max. 100mA for supply voltage >50 VAC/VDC
+24 VDC, max. 50mA for supply voltage <50 VAC/VDC

Buttons:

The device is programmed and operated using the 3 push buttons on the front
and operated (LDx006P0 only).
PAR button:
In operation = to the parameter list;
During programming = save and to the next program point
SEL button:
In operation = display selection;
During programming = select menu item
RST button:
During operation = reset;
During program programming = digit selection

User input:

1 programmable input is available. It can be set via jumper
PNP- or NPN-switching. Maximum input
28 VDC.
Response times:10 ms typ., after 50 ms a new edge is detected at the user input.
user input is recognized.

Relay output (LD2006P0 and LD4006P0):

2x form C changeover relay, 5A at 120/240 VAC

Serial interface (LD2006P0 and LD4006P0):

RS485: 300 to 38400 baud, address 0 to 99, multipoint,
RS232: 300 to 38400 baud, half-duplex

Power supply:

AC supply: 50 to 250 VAC, 50/60 Hz, 26 VA
DC supply: 21.6 to 250 VDC, 11W

Protection class:

IP65 all round.

Housing:

Black lacquered aluminum housing with mounting brackets for
wall or ceiling mounting.

Dimensions:

LD2004xx: W 304.8 mm x H 101.6 mm x D 57.2 mm
LD2006xx: W 406.4 mm x H 101.6 mm x D 57.2 mm
LD4004xx: W 508.0 mm x H 200.0 mm x D 57.2 mm
LD4006xx: W 660.4 mm x H 200.0 mm x D 57.2 mm

Connection:

Internal removable terminal strip blocks

Relative humidity:

max. 85 %. rH, non-condensing.

Ambient temperature:

Operation: 0 °C to +65 °C
Storage: -40 °C to +70 °C

Electromagnetic compatibility CE compliant:

Interference emission:
EN 55011
LD200400 Class B
LD2006P0 Class A

Interference immunity:
EN61000-4-2
CriterionA
4 kV contact discharge
8 kV air discharge

EN61000-4-3
LD200400
Criterion A
LD2006P0 Criterion B

EN61000-4-4
Criterion A
2 kVPower
1 kVsignal

EN61000-4-5
CriterionA
1 kVL-L, 2 kV L&N-E power

EN61000-4-6 CriterionA
3 V/rms

EN61000-4-11
CriterionA
0.5 cycle

Weight:

LD2004xx: 1.59 kg
LD2006xx: 2.04 kg
LD4004xx: 3.63 kg
LD4006xx: 4.76 kg

Scope of delivery:

Device, fixing material, seal, operating instructions.

Customs tariff number:

8531 20 20

Manufacturer:

Red Lion, USA