Handheld stroboscope Phaser Strobe pbx
Battery operation / continuous operation, with phase shift
- mains-independent due to battery operation
- Suitable for continuous operation
- 30 to 50,000 flashes per minute
- Phase delay in the entire operating range
- external triggering and synchronization possible / trigger edge
- backlit, brilliant LCD display with many functions

The Phaser-Strobe pbx stroboscope is used for speed and vibration measurement or for observing movement. Its handy design and low weight make it easy to carry out measurements even in hard-to-reach places. The flash frequency is set using a rotary knob and shown on a display. The device also has a trigger input and a trigger output, enabling external triggering and synchronization. The supply voltage is provided by an internal rechargeable battery or via an external power supply unit (continuous operation possible).
Display:
Digital backlit brilliant 6-digit LCD display
Operation:
6 buttons on the viewing side and rotary knob on the side for dynamic speed adjustment
Frequency range:
Stroboscope:
30.0 FPM to 50,000.0 FPM (flashes per minute)
0.5 FPS to 830 FPS (flashes per second)
Adjustable via rotary knob, keypad or external triggering.
Tachometer:
Display of speed with external triggering
Range:
5.0 rpm to 250,000 rpm
0.5 FPS to 541.66 FPS
Phase delay:
0.1° to 359.9°
Resolution / time delay:
Resolution:
0.05 FPM to 0.5 FPM
Time delay:
0.01 ms to 1000 ms
Accuracy:
0.004 % of the display value ± 1 last digit
Flash duration:
typ. 10 µs to 25 µs
Lightning energy:
Average 13 watts > 4000 flashes/min;
instantaneous per flash 230 mJ to 4000 flashes/min.
Flash tube:
Pluggable xenon tube (type L-1903),
typ. Lifetime 100 million flashes
Power supply:
Internal rechargeable NiMH battery
Continuous operation possible with external mains adapter (supplied).
Battery capacity lasts for approx. 60 min at 6000 FPM
Charging time: approx. 4 h to 5 h
Input / Output:
Input:
External triggering of the stroboscope, TTL signal up to max. 24 VDC
(pulse width min. 500 ns)
Trigger edge selectable
Output:
Synchronization with other devices, pulse signal 40 µs,
Trigger edge selectable
Sensor supply:
6 VDC
Ambient conditions:
0 °C to +40 °C
Dimensions (W x H x D):
Housing body:
93 mm x 90 mm x 229 mm
Reflector housing:
Diameter 122 mm
Handle:
Length 108 mm
Housing:
Robust plastic housing
Manufacturer:
Monarch Instrument, USA




