Ethernet switch, 5 ports - ETHSW500
5x 10/100BaseT(X)
unmanaged / Plug and Play
- 5x 10/100 BaseT(X)
- Unmanaged / Plug and Play
- IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- IEEE 802.3az: EEE (Energy Efficient Ethernet)
- Broadcast and multicast flooding storm control
- Redundant voltage input / fault signaling relay output
- Operating temperature -40 °C to +75 °C
- Protection class IP30
The ETHSW500 is a very compact and robust Industrial Ethernet switch with 5 x 10/100BaseT(X). It supports 10BaseT according to IEEE 802.3, 100BaseTX according to IEEE802.3u and Flow Control (Ethernet data flow control) according to IEEE802.3x. The compact housing, certified to protection class IP30, was developed for use in harsh and demanding industrial environments where large temperature differences and physical stresses are not unknown.
The ETHSW500 is an unmanaged and plug and play switch with a non-blocking/wirespeed Layer 2 switching engine. Secure transmission is guaranteed thanks to the Store and Forward operating mode. The switchable Flooding Storm Control function protects against unwanted occupation of the available transmission rate by broadcast or multicast data frames.
The switch has a redundant power input and a fault signal relay for signaling a fault. This ensures fault-free operation and direct fault detection in the event of a power supply unit or power supply failure. By implementing IEEE 802.3az Energy Efficient Ethernet, the energy consumption of ports in idle state can be significantly reduced.
Operating mode:
Store and Forward
Switching engine:
wire-speed / non-blocking
Ethernet standards:
- IEEE 802.3 (10BaseT)
- IEEE 802.3u (100BaseTX)
- IEEE 802.3az (EEE)
- IEEE 802.3x (Full Duplex) and
Back-Pressure (Half Duplex)
RJ45 ports:
5x 10/100BaseT(X)
RJ45 - Speed:
Auto-negotiation (10/100 Mbit/s)
RJ45 - Duplex:
Half or full duplex
RJ45 connection:
MDI/MDIX Auto-Crossover /
TD/RD Auto-Polarity
Fault signaling contact:
Fault signaling relay for power supply detection
DIP switch:
1x Flooding Storm Control
1x Power Alarm (fault signaling contact)
MAC table size:
1K
Display:
1x alarm:
ALM - Power supply failure
2x Power Status:
P1, P2 - Power supply status
5x Ethernet port status: Link & Speed
Power supply:
Redundant input terminal block connector with reverse power protection
Voltage range:
12 to 58 VDC
Power consumption:
30 mA at 48V, 25°C, full load
Operating temperature:
-40°C to +75°C (cold start at -40°C)
Storage temperature:
-40°C to +85°C
Humidity:
5 % to 95 % rH (non-condensing)
FCC/EMI:
FCC Part 15
CISPR 22 (EN55022), Class A
Vibration:
IEC60068-2-6
Shock:
IEC60068-2-27
Free fall:
IEC60068-2-32
CE (EMS):
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
(Level 3)
Approvals:
UL Listed E478628
RoHS and WEEE:
compliant
Protection class:
IP30
Execution:
Robust metal housing
Dimensions (WxHxD):
29.1 mm x 112.2 mm x 89.7 mm
(without DIN rail holder)
Weight:
330 gram
Assembly:
DIN rail or wall mounting
Scope of delivery:
Device, terminal strip connector, DIN rail holder, wall mounting bracket, M4 screws, operating and installation instructions
Manufacturer:
Wachendorff Prozesstechnik GmbH & Co KG, Germany
Download
DIN rail power supply unit DRS3-24
Single-phase input: 85 VAC to 264 VAC
Output: 24 VDC
Output power of 72 watts (3 A)
Operating temperature: -25 °C to +71 °C
Overload and overvoltage protection
to top
Contact
Request form