2 channel PID controller module CSPID2
2 universal input channels for thermocouples, Pt100 and process signals.
Analog output and heating current monitoring (options).
Delisting
If you have any questions, please contact our technical application consultants.
- Cost-effective and fast replacement thanks to hot swap
- Automatic addressing minimizes configuration time
- Complete galvanic isolation
- PID control loop with reduced overshoot
- Universal inputs for thermocouples, Pt100 and process signals
- Configuration via WINDOWS™ software
- Autotuning for easy determination of the control parameters
- Analog output and heating current monitoring (options)
- Simple mounting on C-rail or top-hat rail
The new modular controller series consists of a master module and up to 16 different slave modules. The PID controller module CSPID is a complete controller that can be combined with up to 15 other modules to form a multi-zone control system. Thanks to its innovative design, a module can be replaced without removing the power supply and without reconfiguration (hot swap). This significantly reduces downtime in the event of a module failure.
The PID controller module is configured to process a wide range of input signals from the field of thermocouples and resistance thermometers as well as standard signals. The control and alarm outputs are relays or optional SSR relays and can be assigned to up to 7 alarms in addition to the control output. The controller regulates in PID mode and can be optimized for heating and cooling thanks to the option of self-optimization. Extremely fast control behavior, low overshoot, optional analog outputs and simple programming via clear software round off the overall picture.
The 10Base-T Ethernet interface of the master module also enables the network connection of this new innovative series.
Inputs
2 universal input channels for:
Thermocouples type S, T, J, N, K, E, R, B, C
Pt100 2- or 3-wire
0 VDC to 10 VDC
0 mA to 20 mA
Outputs
Output 1 and 2 available as solid-state, NC/NO contact or triac
Output 3 relay changeover contact
Solid-state: NPC OC MOSFET max. 30 VDC at 1 A
NC/NO contact: 3 A at 125 VAC
Changeover contact: 5 A at 125 VAC / 28 VDC
Triac: max. 120 VAC, min. 20 VAC, max. 1 A, min. 0.5 A
Operating frequency: 20 Hz to 500 Hz
Accuracy
Current/voltage input: 0.1 % of the display range
Temperature: 0.3 % of the display range +1 °C
Heating current monitoring: ±3.0 % of the display range
Scaling
Offset
Resolution
Thermocouples: 0.1°
Pt100 input: 0.1° or 1°
Current/voltage: 16 bit
A/D converter: 16 bit
Sampling rate
67 ms
Interfaces
Communication via CS master
Memory
Non-volatile memory for all program parameters.
Master module also saves the parameters.
Indicators
LEDs:
Status
Output 1 to 4
Alarm
Insulation
Via base connector of the master module.
Replacement possible when supply voltage is applied.
Ambient conditions
Working temperature: 0 °C to +50 °C
Storage temperature: -40 °C to +85 °C
Weight
200 g
Assembly
35 mm top-hat rail
Housing
Flame and scratch-resistant plastic housing.
Contact
Request form