Temperature sensor:

Integrated semiconductor sensor

Accuracy:

+/-0.5 °C (in the range 0 °C to +50 °C)

Storage:

Non-volatile memory for 32,767 measurements
maximum. Ring memory mode can be set via software

Recording rate:

1 measurement/2 seconds to 1 measurement/12
hours.

Physical unit:

Each physical unit with up to 10
characters can be programmed via the software and is stored in the device.
stored in the device.

Real-time viewing:

The data logger can be used in conjunction with a
PC for direct viewing and storage of the measurement data.
can be used.

Interface:

USB interface (interface cable required), 2,400
baud.

Supply:

Replaceable 3.6 V lithium battery (included) with a typical
typical service life of 1 year at 25 °C.

Time accuracy:

+/-1 minute per month at 20 °C operating temperature,
without PC connection.

Data format:

The data is provided with date and time as well as the physical unit programmed via
physical unit programmed via software.

Dimensions:

110 mm length; 26 mm diameter

Ambient temperature:

-40 °C to +80 °C, 0 % to 100 % relative humidity. Waterproof up to 45 m.

Weight:

110 grams with aluminum housing
230 grams with stainless steel housing

Software features:

1. graphs: Simultaneous display and analysis of measurement data from
several devices and measurements. Simple switching to
individual display.
2. real-time recording: display of measurement data in real time with simultaneous
saving the data at the same time.
3. graphical cursor: A click on the graph immediately shows time,
measured value, parameter and / or device number.
4. data table: Permanent access to a table view for the detailed
detailed display of the measured values.
5. scaling: An automatic scaling function enables all measured values to be
display of all measured values on the screen. However, it is also possible to
can also be scaled manually.
6. formatting: Color representations, line properties and much more can be
more can be set individually.
7. statistics functions: Average, minimum and maximum value,
deviation etc. can be generated and displayed with a simple mouse click.
be displayed.
8. export of the data: The data can be exported in different formats
formats (*.dat; *.csv; *.txt). The export to EXCEL™ is done
with a single click.
9. interface: The interface with all properties is determined
determined automatically.
10. configuration: The measuring rate, start and stop times can be easily
be set.
11. printout: The data can be easily printed as a graph or table.
be printed out.

The data logger can only be used with the DCMIFC200 interface cable (USB)